2018 SE STR-26 Quadangle Blue

Manufacturer: SE Bikes
SKU: 69324
$899.95
$849.95

Details and Specifications

 

Before the Quadangle there was the STR-1. This dates back to the late 1970s when Stu Thomsen was SE Racing's National #1 Pro and the sport's first superstar. His signature frame at the time was the Stu Thomsen Replica-1. The STR-1 frame has a unique design with both of the double down tubes wrapping underneath the bottom bracket shell and continuing around the Looptail rear end all the way back to the seat tube. Less than ten STR-1 bikes were produces, making them almost mythical and the most sought after frames of all time in the vintage BMX world. Fast forward 40 years to today and SE is proud to bring you the limited edition STR-26. All of the unique features and radness of the original STR-1 but built for the bigger rider with 26" wheels. This bike comes with an authentic SE Racing/Stu Thomsen trading card personally signed by Stu. Once again, SE's BMX history repeats itself.

 

Specifications:

  • Frame: Stu Thomsen Replica, 100% Cr-Mo Tubing, STR-1 Inspired Double Downtube Wrap Beneath Bottom Bracket, Looptail Rear End, Retro Dropouts, Limited Edition & Individually Numbered on the Inside of the Rear Dropout
  • Fork: Cowboy Cut Landing Gear, Full Cr-Mo
  • Crankset: Redline Flight Cranks, Dual Pinch Bolt, 180mm, Sealed Bearing American Bottom Bracket, 39T Redline Flight Sprocket
  • Pedals: X-Pedo Low-profile Platform w/ Removable Pins
  • Chain: KMC Z410A
  • Wheelset: Sealed Bearing 36H High-Flange Hubs w/ Double-wall Rims, ACS Crossfire 17T Freewheel, Stainless Spokes
  • Tires: Vee Tire Co x SE Racing Cub, 26” x 2.0” Front & Rear
  • Brakeset: Tektro 837-AL V-Brake, Slick Cable
  • Brake Levers: Tektro 316A, 2-Finger Alloy
  • Headset: Tange 1-1/8” Threadless
  • Handlebar: Big Honkin’ Cr-Mo Cruiser Bar, 29” x 6”
  • Stem: Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach
  • Grips: Special Edition ODI Mushroom II “Stu Thomsen” Signature Dual-Ply Grips w/ SE Donuts, Made in USA
  • Seat: Stu Thomsen SE Flyer Seat
  • Seatpost: Retro Fluted Micro-Adjust Alloy, 27.2mm
  • Accessories: SE Racing Rad Plate, Chrome STR Quad Padset, Alloy Valve Caps, Cutom Stu Thomsen STR-26 Sticker Sheet, Authentic Trading Card Personally Signed by Stu Thomsen
  • Weight: 29.5 lbs / 13.38 kgs

 

Important Pre-Order Information:

Please be aware that due to the immense popularity of the SE bike models, the 2018 SE models are being offered for pre-order from 4/24/2017 until availability opens up. The button on this page will state either "Add to cart" or "Pre-order" depending on the situation. For pre-orders, payment is due when submitting your pre-order, and all orders will be fulfilled in the sequence they are submitted. Ship date has not been made publicly available by SE, however best estimates put the ship date of pre-orders around late June.

 

Basic Specifications
Model Year 2018